Smooth Installation and Operation of Drum Mixer Mobile Concrete Batching Plant in Laos
With the equipment arriving in Laos, everyone was filled with anticipation. Under the guidance of ZHUCHENG professional engineers, this mobile concrete batching plant was installed in just 3 days.
Introduction of the drum mixer YHZM50 mobile concrete mixing plant
Drum-type mobile concrete mixing station is a concrete production equipment which integrates the material storage, weighing, conveying, mixing, unloading and automatic control system of concrete mixing station with a trailer unit. The YHZM50 mobile drum concrete mixing plant adopts a JZM1000 drum concrete mixer, batching machine adopts a PLD1600 batching machine, the theoretical output is 50 cubic meters per hour.
Configuration of drum mixer YHZM50 mobile concrete mixing plant
The configuration of 50m3/h mobile concrete mixing station mainly includes the following aspects:
Whole Machine Model: YHZM50
Productivity: 50m3/h
Discharge Height: 1.2m
Total Power: 39kw
Concrete Mixer Model: JZM1000
Discharge Volume: 1000L
Charging Volume: 1600L
Mixing Cycle 60S
Batching Machine Model: PLD1600
Weighing Hopper Volume: 1600L
Aggregate Silo Capacity: 7m3
No. of Storage Hopper: 3
Components of drum type mobile concrete mixing station
1. Main engine chassis: The chassis of the mixing main engine is cantilever, which contains the towing pin and parking leg of the trailer truck; Weighing mixer, cement and water additives placed on the chassis; There are patrol walkways and railings around.
2. Peripheral components: cement silo and screw conveyor. Peripheral components are integral parts when working or transporting, so they can be transported and disassembled as a whole.
3. Control box: mobile concrete mixing station. The control room is used as the front support point of the whole station in the working state, and it is put away and stored in the empty space in the bracket during transit transportation; All its control circuits need not be disassembled.
4. Mixing machine: JZM friction rolling mixer is generally used, which can evenly mix the fluidity and hard concrete.
5. Aggregate batching measurement: This system is located at the back end of the whole station, with aggregate (sand, stone) storage hopper at the upper part. The storage hopper can be divided into 2 or 4 compartments, and a heightening plate is set to increase the storage capacity. The pneumatic door is opened in turn, and the aggregate metering is a cumulative metering method for various materials. The bottom is equipped with a walking rear axle and a frame leg when working.
6. Belt conveyor frame: This frame is a truss structure connecting the main chassis and the aggregate batching frame, and a belt frame is built in it; The main frame, belt frame and batching frame are integrated to form the main structure of the whole mobile mixing station.
The advantages of the drum mixer YHZM50 mobile concrete mixing plant
(1) Easy to transport.
(2) Easy installation, disassembly and good transfer performance.
(3) There are few requirements for the foundation of mixing station installation, which can be used on flat ground.
(4) It has a wide range of uses, which can be used in areas with poor conditions and rural construction; (5) Low cost.
